Click to view our Accessibility Statement or contact us with accessibility related questions at 855-740-8229.Skip to content
UP TO 40% OFF SITEWIDE. Shop Sale
Honeylove logo
Watch first · 1 min · Bra fit help

Does the band feel tight? Try this easy stretch technique.

The band should feel firm. It does most of the lifting, and molds to your shape with wear. The one-minute stretch above solves most tight bands.
Looking for help with shapewear? Go to shapewear fit help
Looking for help with a top or bodysuit? Go to tops fit help
01 · Band feels tight

Stretch the band, then give it a few hours.

The band should feel firm. It shouldn’t hurt or stop you from taking a deep breath.
Back view of a pink bra showing the hook-and-eye band
  1. Move to the loosest hook.Use the extender if you have one.
  2. Stretch the band.Watch the video at the top.
  3. Wear it for a few hours, tags on.It often feels easier by then.
  4. Do the two-finger test.Two fingers should fit under the band at your back.
It fits when you can breathe deeply and two fingers fit under the band.
Back to top
02 · Spilling over the cups

Gently stretch the neckline.

Stretching along the neckline helps the cup sit flat against you.
Side view of a model in a black bra
  1. Loosen your straps.Keep a little comfortable tension.
  2. Gently pull along the neckline.From the strap to the center front. Repeat three times.
  3. Reposition your breast tissue.So it fills the cup evenly.
It fits when the top of the cup lies flat, with no line under a T-shirt.
Back to top
03 · Band is loose or rides up

Keep the band level.

The band should stay level. If it rides up, it isn’t supporting you.
Side view of a bra band sitting level
  1. Move one hook tighter.Bands relax with wear. That’s what the other hooks are for.
  2. Loosen your straps.Tight straps pull the band up.
  3. Check it’s level.Side view in a mirror: level with the floor.
It fits when the band stays level when you raise your arms.
Back to top
04 · Not enough lift

Let the band do the lifting.

Lift starts with the band. If it’s loose, the straps end up carrying the weight.
Hands checking the underband of a bra
  1. Move one hook tighter.A firmer band lifts more.
  2. Shorten your straps a little.Until the top of the cup lies flat.
  3. Lean forward and sweep.Make sure you’re all the way in the cups.
It fits when the band feels firm and level all the way around.
Back to top
05 · Cups gap or wrinkle

Shorten the straps and reset the pads.

Usually the straps are too long or the pads have shifted.
Front close-up of a bra with smooth cups
  1. Shorten your straps.Until the top of the cup lies flat.
  2. Reset the pads.Take them out and put them back in flat.
  3. Smooth wrinkled pads with an iron.Medium heat (never high), pad curved side up under a thin cloth. Press lightly in short passes, then let it cool flat.
It fits when the cup is smooth, with no air pocket when you press it.
Back to top
06 · Digs in under the arm

Loosen the straps first.

Tight straps pull the bra up into your underarm.
Close-up of a bra cup and side from the side
  1. Loosen your straps.This usually solves it.
  2. Level the band.If the back rides up, the sides do too.
  3. Try a looser hook.If you’re on the tightest one.
It fits when you can rest your arm at your side without feeling the edge.
Back to top
07 · Gap at the side

Tighten the band.

Usually the band is a little loose or the cup is too big.
Side view of a bra
  1. Move one hook tighter.A firmer band pulls the side in.
  2. Shorten your straps a little.This lifts and closes the side.
  3. Sweep from the side.Fill the cup all the way to your underarm.
It fits when the side lies flat, even when you reach forward.
Back to top
08 · Straps slip off

Shorten your straps.

This is almost always strap length, not size.
Close-up of a bra strap on the shoulder
  1. Shorten both straps.Flat on your shoulder, no slack.
  2. Cross them in the back.If your style allows it.
  3. Check the band.A band that rides up lets the straps slide out.
It fits when the straps stay put when you shrug and reach.
Back to top
09 · How to put on your bra

Five steps to the right fit.

Follow these five steps. Keep the tags on until you’re sure.
Model wearing a black bra with jeans
  1. Choose a hook that feels snug but comfortable.You can move in as the band molds to your shape.
  2. Gently stretch the neckline.Pull along it from the strap to the center front, three times. Then make sure your breast tissue fills each cup evenly.
  3. Set your straps.Flat on your shoulder. No slack, no digging in.
  4. Check the band.Level all the way around. Two fingers fit under it at your back.
  5. Check the cups.Smooth, with no gap and no spilling over.
Back to top

Still not right? We’ll help.

Start an exchange, or talk it through with a fit specialist.
Start an exchange