Click to view our Accessibility Statement or contact us with accessibility related questions at 855-740-8229.Skip to content
UP TO 40% OFF SITEWIDE. Shop Sale
Honeylove logo
Model in a white shaping tank
Tops fit help

Top feels tight? Try this first.

It should feel firm. It has a built-in bra and smoothing panels.
Looking for help with a bra? Go to bra fit help
Looking for help with shapewear? Go to shapewear fit help
01 · Too tight overall

Top feels tight? Try this first.

It should feel firm, but you should still breathe deeply and raise your arms.
Model in a light blue LiftWear Cami, arm raised
  1. Give it a little time.It breaks in as you wear it and should feel less snug shortly. Keep the tags on while it settles.
  2. Settle into the cups.Lean forward and lift each side into the cup.
  3. Do the breath test.Take a deep breath and raise both arms.
It fits when you can breathe deeply and it doesn’t leave deep marks.
Back to top
02 · Too loose

It may be sitting too low.

If you barely feel it, it may be sitting too low.
Model in a fig LiftWear Cami, front view
  1. Pull the bra band up.It sits right under your bust.
  2. Shorten your straps.On the Cami. This lifts the whole top into place.
  3. Look for wrinkles.Wrinkles mean extra fabric.
It fits when you feel a firm, even hold through your middle.
Back to top
03 · Too long

Line up the bra band first.

Extra length usually bunches at your hips.
Side view of a black LiftWear Cami at the hip
  1. Line up the bra band first.Right under your bust, then smooth down.
  2. Shorten your straps.On the Cami. This lifts the hem.
  3. Check how it fits overall.Too long and loose usually means one size down.
It fits when the hem lies smooth at your hips with no bunching.
Back to top
04 · Spilling over the cups

Get all the way into the cups.

Usually you’re not all the way in the cups, or the straps are too tight.
Close-up of the cup of a navy LiftWear Tank
  1. Lean forward and settle in.Lift each side into the cup from under your arm.
  2. Loosen your straps.On the Cami. Tank straps don’t adjust.
  3. Check the pads.They should lie flat, with the pointy side toward the strap.
It fits when the top of the cup lies flat against you.
Back to top
05 · Cups gap or wrinkle

Shorten the straps and reset the pads.

Usually the straps are too long or the pads have shifted.
Close-up of smooth cups on a fig LiftWear Tank
  1. Shorten your straps.On the Cami. Until the top of the cup lies flat.
  2. Reset the pads.Pull them out from the top. Roll each one up, tuck it into the pocket, and smooth it out from inside. The pointy side faces the strap.
  3. Smooth wrinkled pads with an iron.Take the pads out. Set your iron to medium heat (never high). Lay the pad flat, curved side up, under a thin cloth. Press lightly in short passes, then let it cool flat.
It fits when the cup is smooth, with no air pocket when you press it.
Back to top
06 · Hard to get on or off

It goes on like shapewear.

It’s firmer than a regular top, so it goes on like shapewear.
Front view of a model in a white LiftWear Tank
  1. Step into it.Don’t pull it over your head. If you’re fuller in the hips, over the head may be easier.
  2. Pull it up by the sides.Not by the straps. Give it a little shimmy over your hips.
  3. Put your arms in last.Slip into the straps once it’s up at your waist.
It fits when it goes on in under a minute.
Back to top
07 · Not enough lift

The band does the lifting.

The built-in bra lifts best when the band sits right under your bust.
Close-up of the built-in bra band on a black LiftWear Cami
  1. Pull the bra band into place.Right under your bust, not on it.
  2. Lean forward and settle in.Lift each side into the cup.
  3. Shorten your straps.On the Cami.
It fits when your bust sits in the cups and stays there all day.
Back to top
08 · Straps slip off

Shorten the straps.

Tank straps don’t adjust, so they depend on the right size.
Back view of an espresso LiftWear Cami showing the straps
  1. Shorten your straps.On the Cami.
  2. Pull the bra band into place.A band that sits low lets the straps slide.
  3. Check the size.On the Tank, slipping straps can mean one size down.
It fits when the straps stay put when you shrug and reach.
Back to top
09 · How to put on your top

Five steps to the right fit.

Follow these five steps. Keep the tags on until you’re sure.
Front view of a model in a deep aqua LiftWear Tank
  1. Step into it.Just like shapewear. If you’re fuller in the hips, pulling it over your head may be easier.
  2. Pull it up by the sides.Not by the straps. Give it a little shimmy over your hips.
  3. Slip your arms into the straps.On the Cami, tighten them for more support or loosen them for more length.
  4. Settle into the cups.Lean forward and lift each side into the cup from under your arm.
  5. Smooth it down.The bra band sits flat under your bust. Nothing should bunch or roll.
Back to top

Still not right? We’ll help.

Start an exchange, or talk it through with a fit specialist.
Start an exchange